|
More lift options than ever for 2025! |
|
More lift options than ever for 2025! |
Steel Mount Boathouse Lifts for V-Hull boats with A-Drive Hoist
"Go
Here" To see our other Boathouse Lifts "Go
Here" To see the home Page.
|
|
 |
|
| Boat
Hoist USA introduces a lift kit for boat houses using steel. The
steel kits will fit any application using I-beam, channel or steel
tubing as overhead beams. All components are hot dipped galvanized
and do not require welding or drilling by the installer Steel Component Kits:
The components kit includes the
hangers needed to hang the kit on existing overhead beams.
 |
STEEL KITS INCLUDE:
|
|
WHAT
SIZE KIT DO I NEED?
When deciding the correct kit for your boat it is always a good idea to buy more lifting capacity than you need. In many cases the boat's weight is only the DRY weight and in some cases it does not include the engine. If your boat weighs 4400 lbs, it would be wise to choose a 6000 lb lift. If you have a cradle, you need to add at least 400 lbs. more to the lift. |
 GO HERE FOR A LARGER VIEW |
 GO HERE FOR A LARGER VIEW |
 GO HERE FOR A LARGER VIEW |
 |
SCPC-A 7000
Deluxe
Steel Mount
Cradle Lift
with Enclosed
Maintenance Free A-Drive Hoist $3,699.00
7,000 lb Deluxe
Steel Mount
Single Line V-hull Cradle
Lift Kit for Mounting pipe in center of Boat House
Kit includes:
7,000 lb enclosed A-Drive hoist Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists.
1-Galvanized Dual Pipe Support
4 Galvanized 3 Ton pulleys with ball bearings and grease zerk
1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment
124 Ft Pre-Cut Galvanized 5/16" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical
components
*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap
around and bunk boards
"Go Here for Up-grades and Options" , "Go Here for motor and wiring instructions" and "Go Here for installation instructions"
SSCPC-A 7000
Super Deluxe Steel Mount Cradle Lift with
Enclosed Maintenance Free A-Drive Hoist $4,689.00
7,000 lb Deluxe Single Line V-hull
Cradle
Lift Kit for Mounting pipe in center of Boat House
"Go here to compare our
lifts"
1 year warranty on electrical
components
*Customer
supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and the
bunk boards.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"
Call or Text:
318-286-9169
Email:
info@BoatLifts4Less.com
Monday thru Friday 9 to 5
| 100 ft Stainless Steel Cable, Clamps and Thimbles (1/4" Cable) | $125 |
| 100 ft Stainless Steel Cable, Clamps and Thimbles (5/16" Cable) | $175 |
| 15 ft Galvanized 2" I.D. Schedule 40 pipe | $300 |
| Upgrade to 22 inch bunk brackets from 16 inch | $200 |
| Substitute 8,000 lb capacity Aluminum Cradle | $400 |
| Wired for 220volt with 220volt GFCI up-grade | $20 |
| GEM GR1 Remote for single motor | $610 |
| Elite ER1 Remote for single motor | $450 |
| Aluminum Cable Winder for 2 inch pipe. | $66 |
|
Guide Posts for Cradle
for 4 or 5 inch I-beams, set of 4 (Stanchion without PVC Pipe) |
$295 |
|
Guide Posts for Cradle
for 6 inch I-beams, set of 4 (Stanchion without PVC Pipe) |
$295 |
| 36" Padded Guide post bumpers (Black, Blue or Red) | $40 |
| 12" x 12' Black All Weather Bunk Carpet | $17 |
| 6 lb Cable Weight | $26 |
| 10 lb Cable Weight | $62 |
| Compounding Kit (not weighted)(wood mount lifts only) | $350 |
| Compounding Kit (weighted for sling kits) | $385 |
Call or Text:
318-286-9169
Email:
BoatLifts4Less@gmail.com
Monday thru Friday 9 to 5
