Call 318-286-9169

Monday thru Friday 9 to 5


Click to enlarge

Galvanized Pontoon bracket sets for 4 - 6" galvanized cradle I-beams

The Galvanized Pontoon V Bunk Bracket Kit for 4″ 6″ I-Beam Web includes V-Bracket Top Piece, V-Bracket Back Plate, and mounting hardware. Hot dipped galvanized steel brackets. Bracket forms V shape to support each pontoon. 4 brackets needed per cradle. 12″ wingspan. 6″ per side. 30-degree lift from mounting bracket. 4-5/8″ flat plate mounting holes. 4-5/8 wood bunk mounting holes. Back Plate is the support bracket used on the back side of the cradle beam to secure the Galvanized Pontoon Bunk V-Bracket Top Piece to the cradle. Hot dipped galvanized steel. Measure 6″ x 4″ x 5/8″. 4-5/8″ mounting holes. Lag bolts and fasteners secure top piece and back plate to cradle beam. Fits 4″-6″ standard steel I-beams. Double pontoons require 4 brackets. Tritoons require 6 brackets.

$110 each or $425 for a set of 4
PN 12345
Call 318-286-9169 to order.


Click to enlarge

Pontoon Deck Support Bracket Kit

About this Item

  • Wood Bunk Support Brackets
  • Hot Dipped Galvanized
  • Bracket, Back plate, & Fasteners Included

The Pontoon Deck Support Bracket Kit are support brackets for pontoon cradles.  Made from hot-dipped galvanized steel.  2″ x 6″ wood is typically mounted on the brackets. Designed to hold the pontoon boat from underneath the dock. Suspends the pontoons on either side so the weight pressure is not on the actual pontoons. Fits up to 6″ I-beam. The kit includes a bracket, backplate, & fasteners.

Complete set $375
Call 318-286-9169 to order.


Click to enlarge

Aluminum Pontoon V Bunk Bracket Kit for 6″ x 4″ I-Beam Flange

  • Fits Aluminum Beams
  • 3/8″ 6061-T6 Aluminum
  • For 6″ x 4″ I-Beams
  • Made in the USA
  • Easy to Install

The Aluminum Pontoon V Bunk Bracket Kit for 6″ x 4″ I-Beam Flange is a universal design that allows the installer to mount two wooden bunks into a V shaped configuration. Made from 6061-T6 US Aluminum. The brackets are mounted to the Aluminum I-Beam flange on the boat lift cradle in the desired location, then wood is mounted on top of the bracket. Fits 6″ x 4″ standard aluminum I-beams. If building bunks for a tritoon, you will need 6 brackets. Install the bracket using carriage bolts and backplate that secures the bracket around the I-beam. Manufactured by BH-USA. Backplate and hardware included.

$100 each or $385 for a set of 4
PN 93136

Call 318-286-9169 to order.


Click to enlarge
 

Aluminum Pontoon V Bunk Bracket Kit for 8″ x 5″ I-Beam Flange

  • Fits Aluminum Beams
  • 3/8″ 6061-T6 Aluminum
  • For 8″ x 5″ I-Beams
  • Made in the USA
  • Easy to Install

The Aluminum Pontoon V Bunk Bracket Kit for 8″ x 5″ I-Beam Flange is a universal design that allows the installer to mount two wooden bunks into a V shaped configuration. Made from 6061-T6 US Aluminum. The brackets are mounted to the Aluminum I-Beam flange on the boat lift cradle in the desired location, then wood is mounted on top of the bracket. Fits 8″ x 5″ standard aluminum I-beams. If building bunks for a tritoon, you will need 6 brackets. Install the bracket using carriage bolts and backplate that secures the bracket around the I-beam. Manufactured by BH-USA. Backplate and hardware included.

$119 each or $370 for a set of 4
PN 93137
Call
318-286-9169 to order.


Click to enlarge

Aluminum Pontoon V Bunk Bracket Kit for 6″ x 10″ I-Beam Flange

  • Fits Aluminum Beams
  • 3/8″ 6061-T6 Aluminum
  • For 10″ x 6″ I-Beams
  • Made in the USA
  • Easy to Install

The Aluminum Pontoon V Bunk Bracket Kit for 6″ x 10″ I-Beam Flange is a universal design that allows the installer to mount two wooden bunks into a V shaped configuration. Made from 6061-T6 US Aluminum. The brackets are mounted to the Aluminum I-Beam flange on the boat lift cradle in the desired location, then wood is mounted on top of the bracket. Fits 6″ standard aluminum I-beam flanges. If building bunks for a tritoon, you will need 6 brackets. Install the bracket using carriage bolts and backplate that secures the bracket around the I-beam. Manufactured by BH-USA.

$85 each or $320 for a set of 4
PN 02022
Call
318-286-9169 to order.


Call or Text: 318-286-9169 Email: info@BoatLifts4Less.com
Monday thru Friday 9 to 5